In my previous post, we discussed use of the open-source Zeek software to support network security monitoring at ESnet. In this post, I’ll talk a little about work underway to improve Zeek’s ability to support network traffic monitoring when faced with stream asymmetry.
This comes from recent work by two of my colleagues on the ESnet Security team.
Scott Campbell and Sam Oehlert presented ‘Running Zeek on the WAN: Experiences and solutions for large scale flow asymmetry’ during a workshop held last year at CERN Geneva that explained the phases and deployment of the Zeek-on-the-WAN (ZoW) pilot in detail.
Some of the significant findings and results from this presentation are highlighted below:
- Phase I: Initial Zeek Node Design Considerations
- Select locations that provide an interesting network vantage point – in the case of our ESnet network, we deployed Zeek nodes on our commodity internet peerings (eqx-sj, eqx-chi, eqx-ash) since they represent the interface to the vast majority of hostile traffic.
- Identifying easy traffic to test with and using spanning ports to forward traffic destined to the stub network on each of the routers used for collection.
- Phase I: Initial Lessons learned from testing and results
- Some misconfigurations were found in the ACL prefix lists.
- We increased visibility into our WAN side traffic through implementation of new background methods.
- Establishing a new process for end-to-end testing, installing and verifying Zeek system reporting.
- Phase II: Prove there is more useful data to be seen
- For phase II we moved towards collection of full peer connection records, from statistical sampling based techniques. Started running Zeek on traffic crossing the interfaces which connect ESnet network peers to the internet from the AS (Autonomous system) responsible for most notices. .
- To get high fidelity connection information without being crushed by data volume, define a subset of packets that are interesting – zero length control packets (Syn/Syn-Ack/Fin/Rst) from peerings.
- Phase II: Results
- A lot of interesting activity got discovered like information leakage in syslogs, logins (and attempted logins) using poorly secure authentication protocols, and analysis of the amount of asymmetric traffic patterns gave valuable insights to understand better the asymmetric traffic problems.
- Ongoing Phase III: Expanding the reach of traffic collection on WAN
- We are currently in the process of deploying Zeek nodes at another three WAN locations for monitoring commodity internet peering – PNWG (peering at Seattle WA), AM-SIX (peering at Amsterdam) and LOND (peering at London)
As our use of Zeek on the WAN side of ESnet continues to grow, the next phase to the ZoW pilot is currently being defined. We’re working to incorporate these lessons learned on how to handle traffic asymmetry into these next phases of effort.
Some (not all) solutions being taken into consideration include:
- Aggregating traffic streams at a central location to make sense out of the asymmetric packet streams and then run Zeek on the aggregated traffic, or
- Running Zeek on the individual asymmetric streams and then aggregating these Zeek streams @ 5-tuple which will be aggregation of connection metadata rather than the connection stream itself.
We are currently exploring these WAN solutions as part of providing better solutions to both ESnet, and connected sites.